Post 25: Differences between the principle deliverables & Introducing Matthew Tomlin

Today’s post wraps up the 3 month trial of the first CCMC Editors’ Blog.  We hope that the topics covered have helped you get a better insight into the drafting rules.  These rules cover the drafting not only of European Standards (EN), but also Technical Specifications (TS), Technical Reports (TR) and other deliverables.  However, you may be asking yourselves, what are the main differences between these three deliverables?  And which should I use?  Well, below are a few explanations and tips.

This is what our rules say (extracts from the CEN-CENELEC Internal Regulations Part II ‘Common Rules for Standardization Work’:

 

 

  

 

 

 

 

 

 

 

 

In terms of drafting therefore it is important to note that Technical Reports are documents that contain informative material, such as data, testing results and surveying results.

In addition, this table, that CCMC often uses in presentations, gives an outline of the main differences between the three deliverables. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

And finally, this blog has also given the possibility for you to get to know the CCMC Editors and each week they have introduced themselves.  I suppose it’s my turn now!

 

 

I’m Matthew Tomlin and I’m British, 36 years old and originally from Lancashire in the northwest of England.  I came to Belgium after graduating from University and I have been working here for 12 years now.  I often travel back to the UK where I am very fond of looking after my family’s Shetland ponies and being out in the countryside.  I also often travel to Sweden, having lived there in the past.  I studied languages at University and these days I am learning Albanian, which has rather a challenging grammar! 

What do I enjoy most about my job?  Well, CCMC is a fantastic place to work and I like the contact with our Members and Technical Body Secretaries.  Quality European Standards and a motivated, happy team are my main goals.  Earlier this year we started contacting Technical Bodies planning meetings in the CCMC Meeting Centre, asking if they needed some editing support.  Whilst being a small team of editors compared to the number of Technical Bodies and Working Groups, it is our aim to help at the early stages of the drafting process in order to help the overall development time and to avoid the late identification of problems in the texts of European Standards.  We will continue to make contact with Technical Bodies with specific drafting issues or questions to offer this support in 2015. 

I really hope that you have found this Blog informative and useful.  As for the next set of Blog posts?  Watch this space!  All that’s left for me to say is Merry Christmas and Happy New Year!

Matthew  (mtomlin@cencenelec.eu)

 

© All CCMC posted information is copyrighted by CEN and/or CENELEC.  Extracts may be used providing that the source is mentioned.

Please note that the CCMC posted information is drawn from a variety of sources already publicly available on the CEN and CENELEC websites.

 

Post 24: Introducing Mélanie Herfurth

Introducing…

Mélanie Herfurth – Administrator – Publications Standards – CCMC

Tell us a bit about yourself

My name is Mélanie Herfurth and I am Belgian. I have been working at CCMC for 7 years. I spend most of my free time studying Japanese and recently I have started practising aikido.

What are you working on right now?

I am processing the translations that we received today.

What does the translation procedure involve?

The three official languages of CEN and CENELEC are English, French and German. Most of the time, CCMC processes the English version and requests the French and German versions from the Translation Member Bodies.

Nearly all documents are sent to translation after they have been edited. The translation period usually lasts 4 weeks for publications and 8 weeks for drafts and final drafts, but translators can request an extension (up to 16 weeks) for long documents or series.

Once a translation is finished, the translator delivers it to CCMC via email for CENELEC documents and via e-Trans for CEN documents. All translations delivered by the deadline will be circulated with the reference version while translations coming in late will be circulated within a week of reception.


Mélanie Herfurth (mherfurth@cencenelec.eu)

© All CCMC posted information is copyrighted by CEN and/or CENELEC.  Extracts may be used providing that the source is mentioned.

Please note that the CCMC posted information is drawn from a variety of sources already publicly available on the CEN and CENELEC websites.

Post 23: Annexes

Use and layout of annexes in a European deliverable

Annexes are a conditional element that can be found at the end of the document before the Bibliography. They shall appear in the order in which they are cited in the text and shall be designated by a heading comprising the word “Annex” followed by a capital letter in serial order, beginning with “A”, e.g. Annex A. The annex heading will be followed by the indication “(normative)” or “(informative)”, depending on how it is cited in the text, and by the title of the annex, for example:

  

 As mentioned in our previous posts on Figures and Tables, the numbers given to clauses, subclauses, tables, figures and formulae in an annex shall be preceded by the annex letter and a full stop, e.g. Table A.1, Figure B.1, Formula (C.1). Annexes can be divided into clauses, subclauses, paragraphs and lists and, as with clauses in the body of the text, a clause shall not be created unless there is at least one further clause in the annex (e.g. do not create a clause D.1 if there is no D.2).

Annexes shall be listed in the table of contents followed by their indication “(normative)” or “(informative)” and title.

Annexes can be used for a variety of reasons, including to provide information on special national conditions, A-deviations and, in the case of CENELEC documents, normative references. In a revised version of a document, the list of changes from the previous version, if too extensive to include in the Foreword, can be included in an annex.

What is the difference between an informative and a normative annex?

An annex can be either informative or normative, depending on how it is referred to in the text. Normative annexes give additional provisions to those in the body of the document. It shall be made clear in the body of the text that the user is required to use this annex in order to comply with the document.

Informative annexes provide additional information that will assist in the understanding or use the document. An annex’s informative status shall be made clear by the way it is referenced in the text. It is important to note that informative annexes may contain “optional requirements” (e.g. a test method that is optional may contain requirements), but there is no need to comply with these requirements to claim compliance with the document.

Annexes for existing special national conditions

Information on special national conditions shall be given in a normative annex introduced by the following text:

Annexes for existing A-Deviations

Information on A-deviations shall be given in an informative annex, introduced by the following text:

 

a)        If the European Standard is under an EU Directive, the introductory text shall be followed by:

b)   If the European Standard is not under any EU Directive, the introductory text shall be followed by:

 

According to CEN-CENELEC IR Part 2:2011, E.2.3, the exact identification of the regulation of the relevant country shall be quoted (title, date and where possible the relevant clause).

For CENELEC only: European annexes on normative references

Where a European Standard is an endorsement of an International Standard, a normative annex giving a list of the normative references, together with the references of the European publications to be used instead, shall be added. The list of references shall be preceded by the following text:

 

For more information on annexes, see 6.3.8, 6.4.1 and Annex ZB of the InternalRegulations Part 3.

Any questions about above or any other posts?  If so, please leave a comment or send us an email at production@cencenelec.eu!

 

Elysia Booth (ebooth@cencenelec.eu)

© All CCMC posted information is copyrighted by CEN and/or CENELEC.  Extracts may be used providing that the source is mentioned.

Please note that the CCMC posted information is drawn from a variety of sources already publicly available on the CEN and CENELEC websites.

Post 22: Introducing Sophie Vandriessche

Introducing…

Sophie Vandriessche – Administrator – Publications Standards – CCMC

Tell us a bit about yourself.

My name is Sophie Vandriessche and I am originally from France. I spend my free time cooking, walking, gardening and swimming with my daughter.

I have been working as an editor in CCMC since 1996. I was the first one in CCMC to start a pilot project in 2001: homeworking. Following the good results of this experience, I have since then been working from home four days a week and homeworking has now been extended to more colleagues in CCMC, like Cynthia.

Like Cynthia, Elysia, Sarah, Mélanie and Frédéric, my main activities are editing final drafts and publications of European deliverables.

What are you working on right now?

I am currently preparing the finalization of a consolidated text.

What does that involve?

What we call a consolidated text is the update of a published standard through the preparation of an amendment to correct rather urgent technical points.

The process for the amendment at Formal Vote stage or UAP stage is exactly the same as usual (for more information, please see Sarah's blog in October).

However, the preparation of a consolidated text at publication stage is slightly different: once the vote on the Formal Vote or UAP is closed and is positive, the editor consolidates the original standard with the amendment text (including earlier published amendments and corrigenda) and incorporates the editorial corrections resulting from the voting comments.

All modifications included into the original EN are identified in the consolidated text with a tagging system.

Afterwards, the usual procedure for a "classical" publication applies: the consolidated text, together with an instruction sheet prepared by the editor and detailing the modifications brought into the original EN, is sent to the TC Secretary for a 3-week proofing period during which the TC Secretary has to approve the document and/or make any comments for improvement.

Once the TC Secretary has given his final approval, the finalized text is sent to DIN and AFNOR translators for a 4-week translation period, after which the standard will be published.

If you have any questions about above, do not hesitate to send me a message!

Sophie Vandriessche (svandriessche@cencenelec.eu)

 

© All CCMC posted information is copyrighted by CEN and/or CENELEC.  Extracts may be used providing that the source is mentioned.

Please note that the CCMC posted information is drawn from a variety of sources already publicly available on the CEN and CENELEC websites.

Post 21: We need your feedback!

Hello!

We are fast approaching the end of the year, and there are only a couple of weeks left until our last CCMC Blog post is up on 15^th December.

We’ve had well over 3000 hits so far and top hit countries are United Kingdom, United States, Germany then France, closely followed by Austria, Sweden, Poland, Italy then Switzerland.

It’s nice to know where our audience is!

So we’d like to say a massive THANK YOU! DANKESCHÖN! MERCI! TACK! DZIĘKI! and GRAZIE! to you all for taking a moment to look at our posts.

However, before we reach the end of the trial we would like to ask you already to send us your feedback.

·         How useful have you found our posts?

·         Did we explain well the chosen topics?

·         Did our posts meet your expectations?        

·         Have you managed to apply what you learnt from our blog to the drafting of a standard?  If so, what?

·         Has any of this improved your understanding of the drafting rules and the CCMC Editors’ tasks?

·         Was there an area or topic that you would have liked us to cover?

We firmly believe that all feedback has a positive effect, especially the negative feedback!

We hope that you can spend a brief moment to get in touch with us, either by posting a comment in reply to this post (click on the “No comments” link below) or by sending us an email to production@cencenelec.eu.

Thank you very much, enjoy the final posts!

 

Matthew Tomlin

 

© All CCMC posted information is copyrighted by CEN and/or CENELEC.  Extracts may be used providing that the source is mentioned.

Please note that the CCMC posted information is drawn from a variety of sources already publicly available on the CEN and CENELEC websites.